Cove Lights

The 16 foot section of RGB led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of RGB tape lights, one 4 pin female connector, one ribbon flex controller with 44 key remote and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 146 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. The RGB ribbon flex controller with 44 key remote allow you to control the speed of the color change. The remote control is an infrared remote control and has a range of 5-8 feet. There are 44 remote control buttons on the remote itself. There are 25 pre programmed static colors, 5 color changing modes, 6 user programmed static colors and all the static colors are dimmable. The fastest color transition time in the color changing mode is 1 second and the slowest transition time is 10 seconds. The maximum transition time through the complete color changing sequence is 70 seconds.

The 32 foot section of RGB led cove lights come with everything you need to power up the cove lights. You will receive 2 each 16 foot sections of RGB tape lights, one 4 pin female connector, one ribbon flex controller with 44 key remote and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 146 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. The RGB ribbon flex controller with 44 key remote allow you to control the speed of the color change. The remote control is an infrared remote control and has a range of 5-8 feet. There are 44 remote control buttons on the remote itself. There are 25 pre programmed static colors, 5 color changing modes, 6 user programmed static colors and all the static colors are dimmable. The fastest color transition time in the color changing mode is 1 second and the slowest transition time is 10 seconds. The maximum transition time through the complete color changing sequence is 70 seconds.

The 16 foot section of RGB led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of RGB tape lights, one 4 pin female connector, one ribbon flex controller with 32 function and one 24 volt 432 watt power supply. The tape light cove lights dimensions are .53 inches wide by .27 inches tall by 16.4 feet long. The cove lights can be cut every 4 inches. The cove lights consume 4.4 watts of electricity per foot and product 360 lumens of light per foot. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. Please note this is a hard wire power supply.

The 32 foot section of RGB led cove lights come with everything you need to power up the cove lights. You will receive 2 each 16 foot sections of RGB tape lights, one 4 pin female connector, one ribbon flex controller with 32 functions and one 24 volt 432 watt power supply. The tape light cove lights dimensions are .53 inches wide by .27 inches tall by 32.8 feet long. The cove lights can be cut every 4 inches. The cove lights consume 4.4 watts of electricity per foot and product 360 lumens of light per foot. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. Please note this is a hard wire power supply.

The 16 foot section of blue led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of blue tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 1.8 watts of electricity per foot and product 13.19 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of green led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of green tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 46.31 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of pure white led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of pure white tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 74.01 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of purple led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of purple tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2 watts of electricity per foot and product .55 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of red led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of red tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 20.88 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of warm white led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of warm white tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 70.72 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The 16 foot section of yellow led cove lights come with everything you need to power up the cove lights. You will receive one 16 foot section of yellow tape lights and one 12 volt 60 watt power supply. The tape light cove lights dimensions are 3/8 inch wide by 1/4 inch tall by 16.2 feet long. The cove lights can be cut every 2 or 3 inches depending on the color. The cove lights consume 2.2 watts of electricity per foot and product 24.65 lumens of light per foot. The cove lights come with a 3M double sided tape for easy installation. The 12 volt 60 watt power supply is a UL listed power supply that plugs into a standard electrical outlet. The dimensions of the power supply is 5 inches long by 2 inches wide by 1.5 inches tall. The power supply can be placed in the cove or you can extend the lead wires out if you need to. To install these lights there is some minor wiring you might have to do between the power supply and the lights so we suggest you have some low voltage wire along with the crimping electrical connectors or wire nuts on hand. You can also purchase an optional dimmer for this product and we have a few different types listed on our website.

The blue 24 volt UL listed waterproof flexible led strip tape lighting consumes 4.4 watts of power per foot and produces 360 lumens per foot making this one of our brightest tapes on the market. The product comes complete with a PVC cover and does not employ any types of glue making the product water resistant. The outer PVC cover is UV treated and will not turn yellow over time. The LEDs used in this product are 5050SMD chips and they are spaced .65 inches apart. The spool length is 16.4 feet long and the projected lifespan of the LED chips are 50,000 hours. You can cut this product every 4 inches and it is clearly marked on the tape.

The pure white 24 volt UL listed waterproof flexible led strip tape lighting consumes 4.4 watts of power per foot and produces 360 lumens per foot making this one of our brightest tapes on the market. The product comes complete with a PVC cover and does not employ any types of glue making the product water resistant. The outer PVC cover is UV treated and will not turn yellow over time. The LEDs used in this product are 5050SMD chips and they are spaced .65 inches apart. The spool length is 16.4 feet long and the projected lifespan of the LED chips are 50,000 hours. You can cut this product every 4 inches and it is clearly marked on the tape.

The warm white 24 volt UL listed waterproof flexible led strip tape lighting consumes 4.4 watts of power per foot and produces 360 lumens per foot making this one of our brightest tapes on the market. The product comes complete with a PVC cover and does not employ any types of glue making the product water resistant. The outer PVC cover is UV treated and will not turn yellow over time. The LEDs used in this product are 5050SMD chips and they are spaced .65 inches apart. The spool length is 16.4 feet long and the projected lifespan of the LED chips are 50,000 hours. You can cut this product every 4 inches and it is clearly marked on the tape.

This is the required leader cable that goes between your power supply and the RGB ribbon flex.

The indoor dimmer with key fob remote can be used with standard type 3528 or pro type 5050 ribbon flex. The dimmer is used to dim down the brightness of the ribbon flex. Please note you will need one dimmer switch per power supply.

The indoor wall dial dimmer switch can be used with standard type 3528 or pro type 5050 ribbon flex. The dimmer switch is used to dim down the brightness of the ribbon flex. Please note you will need one dimmer switch per power supply.

The RGB ribbon flex controller with 28 key remote allow you to control the speed of the color change. The remote control is an infrared remote control and has a range of 5-8 feet. The remote comes with built in programs, allows you to fade the colors in & out and allow you to dim the brightness of the ribbon flex. Note: when you purchase this product you will need a power supply.

The RGB ribbon flex dimmer controller with red, green and blue dials. The dimmer controller allows you to fade the colors in and out.

Splice connector can only be used with standard type 5050 ribbon flex.

50 inch clear polycarbonate mounting channel cap for ribbon flex.