Visit our other Website.

Raceway Channel

2.25" x 2.25" Channel Black Molded End Cap

2.25" x 2.25" Channel Black Molded End Cap

The black molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$9.50
2.25" x 2.25" Channel Gold Molded End Cap

2.25" x 2.25" Channel Gold Molded End Cap

The gold molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$9.50
2.25" x 2.25" Channel Silver Molded End Cap

2.25" x 2.25" Channel Silver Molded End Cap

The silver molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$9.50
2.25" x 2.25" Channel Galvanized Steel Mounting Brace

2.25" x 2.25" Channel Galvanized Steel Mounting Brace

The galvanized steel mounting brace is used to reinforce the aluminum channel and the dimensions are 3.5 inches long by 3/4 inches wide by 2 3/8 inches high. The mounting brace has a primer gray finish (can be painted to match the color of your channel) and has pre-drilled hold for easy installation.
$9.80
2.25" x 2.25" Channel Galvanized Steel Sleeve

2.25" x 2.25" Channel Galvanized Steel Sleeve

The galvanized steel sleeve is used to reinforce and cover seams when putting multiple sections together. The sleeve has a primer gray finish (can be painted to match the color of your channel) and the dimensions are 2 3/8 inches long by 3 inches wide by 2 3/8 inches high. When installing the sleeve you can either use screws or pop-rivets to connect sleeve to channel.
$16.10
2.25" x 2.25" Channel End Cap Steel Primer Finish

2.25" x 2.25" Channel End Cap Steel Primer Finish

The steel primer finish end cap is used to terminate the end of the channel and the dimensions are 2 3/8 inches long by .5 inches wide by 2 3/8 inches high. The end cap has a primer gray finish (can be painted to match the color of your channel) and has pre-drilled hold for easy installation.
$18.30
2.25" x 2.25" Channel End Cap Galvanized Steel

2.25" x 2.25" Channel End Cap Galvanized Steel

The galvanized steel end cap is used to terminate the end of the channel and the dimensions are 2 3/8 inches long by .5 inches wide by 2 3/8 inches high. The end cap has a galvanized steel finish (can be painted to match the color of your channel) and has pre-drilled hold for easy installation.
$19.54
25 Pack Candelabra Base Socket with Clip

25 Pack Candelabra Base Socket with Clip

Pack of 25 each candelabra Base Socket with clip are used with 18 gauge wire and can accommodate up to 75 watts or 125 volts max. The socket is made of phenolic plastic, has a though hole mounting option and requires 13/16 inch hole diameter.
$80.00
25 Pack Intermediate Base Socket

25 Pack Intermediate Base Socket

Pack of 25 each intermediate base socket are used with 16 gauge wire and can accommodate up to 75 watts or 250 volts max. The socket is made of phenolic plastic, has a though hole mounting option and requires 1.0 - 1 1/16 inch hole diameter.
$80.00
2.25" x 2.25" Channel Black Molded End Cap Case of 10

2.25" x 2.25" Channel Black Molded End Cap Case of 10

The case of 10 each black molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$81.00
2.25" x 2.25" Channel Gold Molded End Cap Case of 10

2.25" x 2.25" Channel Gold Molded End Cap Case of 10

The case of 10 each gold molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$81.00
2.25" x 2.25" Channel Silver Molded End Cap Case of 10

2.25" x 2.25" Channel Silver Molded End Cap Case of 10

The case of 10 each silver molded end cap is used to terminate the end of the channel and the dimensions are 2.5 inches long by 3/8 inches wide by 2 3/8 inches high. The end cap has pre-drilled holes in it that will line up with the pre-drilled holes located at the end of the channel for easy installation.
$81.00
2.25" x 2.25" Channel Galvanized Steel Mounting Brace Case of 10

2.25" x 2.25" Channel Galvanized Steel Mounting Brace Case of 10

The case of 10 each galvanized steel mounting brace is used to reinforce the aluminum channel and the dimensions are 3.5 inches long by 3/4 inches wide by 2 3/8 inches high. The mounting brace has a primer gray finish (can be painted to match the color of your channel) and has pre-drilled hold for easy installation.
$83.20
25 Pack Medium Base Socket with Clip

25 Pack Medium Base Socket with Clip

Pack of 25 each leviton E27 Medium Base Socket with clip are used with 12 gauge wire and can accommodate up to 660 watts or 250 volts max. The socket is made of phenolic plastic, has a though hole mounting option and requires 1 3/8 inch hole diameter.
$86.00
Satin Anodized Aluminum Channel 8 Foot Section

Satin Anodized Aluminum Channel 8 Foot Section

The 8 foot section of clear satin silver finish anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$119.36
Silver Anodized Aluminum Channel 8 Foot Section

Silver Anodized Aluminum Channel 8 Foot Section

The 8 foot section of silver mirror anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$132.32
Gold Anodized Aluminum Channel 8 Foot Section

Gold Anodized Aluminum Channel 8 Foot Section

The 8 foot section of high polished gold finish anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$136.64
2.25" x 2.25" Channel Galvanized Steel Sleeve Case of 10

2.25" x 2.25" Channel Galvanized Steel Sleeve Case of 10

The case of 10 each galvanized steel sleeve is used to reinforce and cover seams when putting multiple sections together. The sleeve has a primer gray finish (can be painted to match the color of your channel) and the dimensions are 2 3/8 inches long by 3 inches wide by 2 3/8 inches high. When installing the sleeve you can either use screws or pop-rivets to connect sleeve to channel.
$136.80
2.25" x 2.25" Channel End Cap Galvanized Steel Case of 10

2.25" x 2.25" Channel End Cap Galvanized Steel Case of 10

The case of 10 each galvanized steel end cap is used to terminate the end of the channel and the dimensions are 2 3/8 inches long by .5 inches wide by 2 3/8 inches high. The end cap has a galvanized steel finish (can be painted to match the color of your channel) and has pre-drilled hold for easy installation.
$166.00
Satin Anodized Aluminum Channel 8 Foot Section (Case of 8)

Satin Anodized Aluminum Channel 8 Foot Section (Case of 8)

The case of 8 each 8 foot section of clear satin silver finish anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$830.72
Silver Anodized Aluminum Channel 8 Foot Section (Case of 8)

Silver Anodized Aluminum Channel 8 Foot Section (Case of 8)

The case of 8 each 8 foot section of silver mirror anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$930.92
Gold Anodized Aluminum Channel 8 Foot Section (Case of 8)

Gold Anodized Aluminum Channel 8 Foot Section (Case of 8)

The case of 8 each 8 foot section of high polished gold finish anodized aluminum channel dimensions are 2.25 inches wide by 2.25 inches high by 8 feet long. The aluminum channel has a two piece construction which will make installing the sockets and wire easier. The channel is made with corrosion resistant material and has pre-drilled hole on the bottom section for mounting the end cap. When installing the sockets you will need to figure out what spacing you want and then drill holes in the channel to the desire spacing. Please note brace, end cap and sleeve (if running more than one section) are required and sold separately.
$949.76
Copyright © 2019 Tri North Lighting. Powered by Zen Cart