WiFi or Smart Phone Controllers

The white finish 120 volt 10 inch Priori T2 cabinet light dimensions are 10.25 inches long by 3.75 inches wide and 15/16th of an inch tall. The fixture comes with a built in on/off switch, uses 6 watts of power and is not dimmable. The cabinet light fixture comes with a 6 foot power cord and plugs into a standard electrical outlet. Each light comes with an end to end connectors or you can purchase jumper cables of various lengths to interconnect the lights. The light fixture comes with a 6 watt T2 fluorescent light bulb and is UL listed for indoor use.

The WiFi-103 LED Controller uses the same cutting edge technology as our WiFi-102 LED Controller but also allows the user to use the controller over an existing home or business network. Use the WiFi-103 to control your RGB, two tone, or single color LED lights using any iOS or Android smart phone or tablet. One WiFi controller can be used as an RGB Controller, a Color Temperature Adjustable Controller, or a Single Color Dimmer. With a variety of built in modes, DIY functions, color wheel choices, as well as specific 0-255 brightness settings, this controller is as versatile as it gets. With output ratings of 4A x 3 channels this controller can handle up to 144W of RGB LED Lights, 96W of dual tone LEDs, or 144W of single color LED Lights. Each controller can be paired with an unlimited amount of WiFi-103 receivers. At 6A x 3 channels each wireless receiver can handle 216W at 12VDC or 432W at 24VDC, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes. CE and RoHS approved.

LT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point. The product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process, The product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers. 64 channels choices, users can use 64 groups wireless network independently without interference in one place. Use relay Settings if need further increase the communication distance. Note: This product also can be applied to the RS485 bus equipment where wiring is not convenient to wireless transmit RS485 signal.