The DMX wireless unit is a transmitter and receiver based on its dip switch settings. Connect a DMX 512 standard controller to the SRC-260 and set another SRC-260 set in receiver mode down range and send DMX 512 wireless! The transmit and receive frequencies are 915/916 Hz. Each unit has 2 DMX outputs (1 each 3 pin male XLR and 1 each 3 pin female XLR) The transmitter and receiver will work up to a distance of 492 feet. Each unit is 6.7 inches high, by 3.4 inches wide by 7.9 inches long and weighs 1.5 pounds.

The two-way DMX distributor with one input and two output comes with opto-isolated input and output, both 3 pin and 5 pin connectors, and 1 inch by 2 through. The dimensions are length 9.6 inches, width 6.5 inches, and height 2.8 inches.

The 4-Channel dimmer pack and foot switch provides on/off, flash, chase, and 8 channel controls. The max channel output 15 amps and dimensions of the dimmer pack are length 12 inches, width 6.6 inches, and height 3.2 inches. The dimensions of the foot switch are length 6.7 inches, width 7.5 inches, and height 3 inches.

The 4-channel DMX light stand-mountable chaser comes with 16 built in stand alone chase programs, pre-heat function, memory back-up, master and channel dimming, and standard DMX input and output. The max channel output is 5 amps and the dimensions are length 51.2 inches, width 3.9 inches, and height 3.9 inches.

The four-way DMX distributor with one input and four output comes with electrically isolated input and output, both 3 pin and 5 pin connectors, independent drivers, and data and data display for each output. The dimensions are length 18.9 inches, width 5.7 inches, and height 3.5 inches.

The 6-channel dimmer comes with 6 channel linear dimming channels, 2200 watt max per channel, 6 DMX channels, LCD menu system, and standard DMX input and output connections. The dimensions are length 18.5 inches, width 5.7 inches, and height 3.9 inches.

The 6-Channel DMX dimmer pack comes with standard 3 pin DMX input and output and 8 pin analog (0-10 volt DC control) with microprocessor control and separate DMX addressing for each channel. Other features are phase correction which activates linear dimming (0-100 percent), selectable linear, switch, or square control curves, short circuit protection for each channel (with 10 amp circuit breakers), LCD menu system, and electronic protection against over temperature. The max channels output is 10 amps and the dimensions are length 19 inches, width 15.9 inches, and height 3.5 inches.

The chase 16 controller comes with 16 chase patterns, terminal block or IEC sockets, zero-crossing, inductive or resistive load, with opto-isolation features. It is a 19 inch rack mount with full-on, stand by, auto, manual or sound activation modes. The dimensions are length 19 inches, width 2 inches, and height 1.7 inches.

The Club 192 channel is a compact size controller. This controller can hold 30 banks of scene memory up to 240 scenes. There are 6 programmable chase memories, fade and speed control and even a built in microphone for sound activate mode.

The DMX 19C is a 16 channel DMX controller is a very simple controller and perfect to use if you only have a few lights that you want to set on static colors.

The 16 channel Stage DMX controller is perfect for small stage lighting applications. You can store up to 16 user programs in this controller. There is midi in, out and thru, audio, fade and even speed controls. There is even a built in microphone and independent fot machine output buttons.

The 24 channel Stage DMX controller is perfect for medium stage lighting applications. You can store up to 48 user programs in this controller. There is midi in, out and thru, audio, fade and even speed controls. There is even a built in microphone and independent fot machine output buttons.